메뉴 건너뛰기

Cloudera, BigData, Semantic IoT, Hadoop, NoSQL

Cloudera CDH/CDP 및 Hadoop EcoSystem, Semantic IoT등의 개발/운영 기술을 정리합니다. gooper@gooper.com로 문의 주세요.



/etc/logrotate.d 을 이용한 catalina.out 나누기

 

Apache Tomcat의 로그파일인 catalina.out은 기본적으로 한개의 파일에 로그가 쌓이게 됩니다.


Tomcat을 재시작 하지 않는 이상 계속적으로 쌓이는 듯합니다. 벌써 용량이 후덜덜하네요.
이 파일을 다시는 볼일이 없다면 상관이 없지만...
열어 보려고 한다면... 시간 꽤 걸리듯합니다.
catalina.out의 만행을 그냥 두고 못 본척하신다면... 나중에 눈물 흘릴 수도 있습니다. :")

저도 모니터링 중에 문제가 생겨서 확인하려고 catalina.out 파일을 열어봤더니...
시간이 좀 걸리더군요...

그래서 catalina.out을 나누는 방법을 검색해봤습니다.

로그 파일을 rotate하는 방법에는 보통 4가지가 있습니다.

1. log4j
2. cronolog
3. logrotate
4. shell script


이번 포스트에서는 logrotate에 대하여 알아보겠습니다. 가장 사용하기 쉽고 제가 원하는 동작을 하더군요. :")

구분위치 및 실행 방법설명
데몬(위치)/usr/sbin/logrotate데몬의 위치 및 데몬프로그램
데몬 설정파일/etc/logrotate.conf설정파일
설정디렉토리/etc/logrotate.dlogrotate에 적용할 각종로그파일들 보관하는 디렉토리
상황파일/var/lib/logrotate.statuslogrotate한 작업내역을 보관한 파일
cron(일단위)/etc/cron.daily/logrotatelogrotate는 주기적으로 실행이되어야하므로 cron에 의해 일단위로 실행이 됨


Apache Tomcat 로그 순환 설정 : http://koov.net/blog/?/tag/rotate
위 블로그 가시면 간단히 catalina.out 로그 파일을 자동으로 나누게 설정하는

방법이 있습니다.

$ cd /etc/logrotate.d
$ cat > tomcat

/var/local/tomcat/logs/catalina.out {
copytruncate
daily
rotate 30
missingok
notifempty
}

$ logrotate -f /etc/logrotate.d/tomcat


실행 후 화면,


위 이미지와 같이 catalina.out.1 이라는 파일이 생성되는군요. 흠... 그럼 1, 2, 3 이런식으로 쌓일텐데 관리자의 입장에서는 좀 불편할 수도.... Buuuuuuuuuuut!!!!!

dateext 라는 옵션이 있군요!!!

$ cd /etc/logrotate.d
$ cat > tomcat

/var/local/tomcat/logs/catalina.out {
copytruncate
daily
rotate 30
missingok
notifempty
dateext
}

$ logrotate -f /etc/logrotate.d/tomcat




알아두셔야 할 점은 copytruncate 옵션은 반드시 써야 한다고 합니다.

copytruncate 옵션을 쓰지 않으면 기존의 맨처음 로그가 생성된 파일에 계속해서 로그가 쌓이게 됩니다. 이러한 원인은 톰캣의 로그가 System.err 객체나 System.out을 사용하기 때문에 시스템의 raw디바이스로 출력이 되어 파이프를 타지 않기 때문입니다.
따라서 원래 로그를 다른이름으로 저장하고 새로운 catalina.out을 생성한다해도 실제 로그 스트림은 다른이름으로 지정된 원래 로그쪽으로 계속해서 쌓이게 됩니다.
이걸 방지하기 위해 현재 로그내용을 복사하여 백업본으로 저장한후 원본 로그의 내용을 비우는 방식으로 저장해야 합니다.
그래서 옵션을 copytruncate를 사용해야 합니다.

copytruncate
Truncate the original log file in place after creating a copy, instead of moving the old log file and optionally creating a new one, It can be used when some program can not be told to close its logfile and thus might continue writing (appending) to the previous log file forever. Note that there is a very small time slice between copying the file and truncating it, so some logging data might be lost. When this option is used, the create option will have no effect, as the old log file stays in place.




logrotate의 설정 옵션에 대하여 조금 더 알아보면은,

dailyLog files are rotated every day.
weeklyLog files are rotated if the current weekday is less than the weekday of the last rotation or if more than a week has passed since the last rotation. This is normally the same as rotating logs on the first day of the week, but if logrotate is not being run every night a log rotation will happen at the first valid opportunity.
monthlyLog files are rotated the first time logrotate is run in a month (this is normally on the first day of the month).
notifemptyDo not rotate the log if it is empty (this overrides the ifempty option).
nocompressOld versions of log files are not compressed.
delaycompressPostpone compression of the previous log file to the next rotation cycle. This only has effect when used in combination with compress. It can be used when some program cannot be told to close its logfile and thus might continue writing to the previous log file for some time.
compressOld versions of log files are compressed with gzip by default.
mail addressWhen a log is rotated out of existence, it is mailed to address. If no mail should be generated by a particular log, the nomail directive may be used.
missingokIf the log file is missing, go on to the next one without issuing an error message.


보다 더 많은 옵션과 설명을 보시려면, http://linuxcommand.org/man_pages/logrotate8.html를 참고하세요.

superuser 사이트입니다. 옵션에 대해서 한글로 자세히 설명되어 있습니다.
http://www.superuser.co.kr/linux/logrotate/page04.htm

번호 제목 날짜 조회 수
370 CentOS6에 python3.5.1 소스코드로 빌드하여 설치하기 2016.05.27 4113
369 HUE를 사용할 사용자를 추가 하는 절차 2018.05.29 4113
368 solrdf초기 기동시 "Caused by: java.lang.IllegalAccessError: tried to access field org.apache.solr.handler.RequestHandlerBase.log from class org.gazzax.labs.solrdf.handler.update.RdfUpdateRequestHandler" 오류가 발생시 조치사항 2016.04.22 4114
367 hive 0.13.1 설치 + meta정보는 postgresql 9.3에 저장 2015.04.30 4115
366 like검색한 결과를 기준으로 집계를 수행하는 java 소스 2016.12.19 4115
365 원격의 origin/master를 기준으로 dev branch를 만들어 작업후 원격의 origin/dev에 push하는 방법 file 2016.11.22 4128
364 MapReduce2.0(YARN)기반의 CDH5 설치시 생성되는 사용자및 권한 부여 2018.05.30 4129
363 [Sentry]HDFS의 ACL을 Sentry와 연동후 테스트 2020.06.02 4132
362 source, sink를 직접 구현하여 사용하는 예시 2019.05.30 4133
361 fuseki가 제공하는 web ui를 통해서 dataset를 remove->create할 경우 동일한 동일한 이름으로 지정했을때 fuseki-server.jar가 뜨지 않는 현상 2017.02.03 4142
360 oozie 4.1 설치 - maven을 이용한 source compile on hadoop 2.5.2 with postgresql 9.3 2015.04.30 4144
359 "You are running Cloudera Manager in non-production mode.." warning메세지가 나타나지 않게 조치하는 방법 2018.05.23 4145
358 spark 2.3.0을 설치하가 위해서 parcel에 다음 url을 입력한다. 2018.07.15 4148
357 SQL문장과 Mongo에서 사용하는 명령어를 비교한 것입니다. 2015.09.30 4149
356 ServerInfo객체파일 2016.07.21 4150
355 Class.forName을 이용한 메서드 호출 샘플소스 2016.12.21 4152
354 자주쓰는 유용한 프로그램 2018.03.16 4155
353 ubuntu에 maven 3.6.1설치 및 환경변수 설정 2019.06.02 4157
352 SPIN(SPARQL Inference Notation)이란.. file 2016.02.25 4159
351 java.lang.OutOfMemoryError: unable to create new native thread오류 발생지 조치사항 2016.10.17 4160
위로