메뉴 건너뛰기

Cloudera, BigData, Semantic IoT, Hadoop, NoSQL

Cloudera CDH/CDP 및 Hadoop EcoSystem, Semantic IoT등의 개발/운영 기술을 정리합니다. gooper@gooper.com로 문의 주세요.


1. 현재 연결된 기기 확인

(아래는 31.7GB(/dev/mmcblk0)과 1000.2 GB(/dev/sda)의 2개의 외장기기 확인됨

   /dev/mmcblk0는 /dev/mmcblk0p1과 /dev/mmcblk0p2의 2개 파티션으로 구성 되어 있고

          /dev/sda는 /dev/sda1로 파티션 1개로 구성되어 있음)

root@slave1:~# fdisk -l

Disk /dev/mmcblk0: 31.7 GB, 31657558016 bytes
4 heads, 16 sectors/track, 966112 cylinders, total 61831168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xf7e9dfe5

        Device Boot      Start         End      Blocks   Id  System
/dev/mmcblk0p1            2048       40960       19456+  81  Minix / old Linux
/dev/mmcblk0p2           40961     7577599     3768319+  81  Minix / old Linux

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0xc197d009

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1            2048  1953521663   976759808    7  HPFS/NTFS/exFAT

 

2. device에 mount할 폴더 생성

root@slave1:~# mkdir /app
root@slave1:~# mkdir /app/usb
root@slave1:~# mkdir /app/usb2
root@slave1:~# mkdir /app/hdd

 

3. hdd는 인식가능하게 파티션을 생성해야함..

root@slave1:/# fdisk /dev/sda

Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel

Building a new DOS disklabel with disk identifier 0xb092454e.

Changes will remain in memory only, until you decide to write them.

After that, of course, the previous content won't be recoverable.


Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)


The device presents a logical sector size that is smaller than

the physical sector size. Aligning to a physical sector (or optimal

I/O) size boundary is recommended, or performance may be impacted.


Command (m for help): o

Building a new DOS disklabel with disk identifier 0xb5607451.

Changes will remain in memory only, until you decide to write them.

After that, of course, the previous content won't be recoverable.


Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)


The device presents a logical sector size that is smaller than

the physical sector size. Aligning to a physical sector (or optimal

I/O) size boundary is recommended, or performance may be impacted.


Command (m for help): n

Partition type:

   p   primary (0 primary, 0 extended, 4 free)

   e   extended

Select (default p): p

Partition number (1-4, default 1): 

Using default value 1

First sector (2048-1953525167, default 2048): 

Using default value 2048

Last sector, +sectors or +size{K,M,G} (2048-1953525167, default 1953525167): 

Using default value 1953525167


Command (m for help): w

The partition table has been altered!


Calling ioctl() to re-read partition table.

Syncing disks.


4. 작성된 파티션을 사용하기 위해 파일시스템을 생성한다.

(아래는 전체를 파티션 1개로 설정한 경우임)

root@slave1:/# mkfs -t ext4 /dev/sda1

mke2fs 1.42.5 (29-Jul-2012)

Filesystem label=

OS type: Linux

Block size=4096 (log=2)

Fragment size=4096 (log=2)

Stride=0 blocks, Stripe width=0 blocks

61054976 inodes, 244190390 blocks

12209519 blocks (5.00%) reserved for the super user

First data block=0

Maximum filesystem blocks=0

7453 block groups

32768 blocks per group, 32768 fragments per group

8192 inodes per group

Superblock backups stored on blocks: 

        32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 

        4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968, 

        102400000, 214990848


Allocating group tables: done                            

Writing inode tables: done                            

Creating journal (32768 blocks): done

Writing superblocks and filesystem accounting information: done     


*파티션 정보 확인

root@slave1:/# fdisk -l


Disk /dev/sda: 1000.2 GB, 1000204886016 bytes

81 heads, 63 sectors/track, 382818 cylinders, total 1953525168 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 4096 bytes

I/O size (minimum/optimal): 4096 bytes / 4096 bytes

Disk identifier: 0xb5607451


   Device Boot      Start         End      Blocks   Id  System

/dev/sda1            2048  1953525167   976761560   83  Linux


Disk /dev/mmcblk0: 31.7 GB, 31657558016 bytes

4 heads, 16 sectors/track, 966112 cylinders, total 61831168 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0xf7e9dfe5


        Device Boot      Start         End      Blocks   Id  System

/dev/mmcblk0p1            2048       40960       19456+  81  Minix / old Linux

/dev/mmcblk0p2           40961     7577599     3768319+  81  Minix / old Linux

root@slave1:/# fdisk -l


Disk /dev/sda: 1000.2 GB, 1000204886016 bytes

81 heads, 63 sectors/track, 382818 cylinders, total 1953525168 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 4096 bytes

I/O size (minimum/optimal): 4096 bytes / 4096 bytes

Disk identifier: 0xb5607451


   Device Boot      Start         End      Blocks   Id  System

/dev/sda1            2048  1953525167   976761560   83  Linux


Disk /dev/mmcblk0: 31.7 GB, 31657558016 bytes

4 heads, 16 sectors/track, 966112 cylinders, total 61831168 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0xf7e9dfe5


        Device Boot      Start         End      Blocks   Id  System

/dev/mmcblk0p1            2048       40960       19456+  81  Minix / old Linux

/dev/mmcblk0p2           40961     7577599     3768319+  81  Minix / old Linux


5. device와 폴더 연결(mount)

root@slave1:/# mount /dev/sda1 /app/hdd

 

6. 자동 mount설정

 vi /etc/fstab에 아래의 내용을 추가한다.

 

 /dev/sda1       /app/hdd        ext4    defaults        0       0


번호 제목 날짜 조회 수
530 Spark Streaming으로 유실 없는 스트림 처리 인프라 구축하기 2016.03.11 3464
529 VPS에서는 root로 실행해도 swap파일을 만들지 못하게 만들어 두었지만 swap파일을 생성하는 방법 2017.06.20 3475
528 Collections.sort를 이용한 List<Map<String, String>>형태의 데이타 정렬 소스 2016.12.15 3476
527 [Dovecot] -ERR [SYS/PERM] Permission denied 2017.06.13 3494
526 editLog의 문제로 발생하는 journalnode 기동 오류 발생시 조치사항 2017.09.14 3498
525 [vi]블럭 및 문서내 복사등에 관련된 명령어 2017.02.17 3502
524 halyard 1.3을 다른 서버로 이전하는 방법 2017.07.05 3506
523 [postgresql 9.x] PostgreSQL Replication 구축하기 2018.07.17 3510
522 컴퓨터 무한 재부팅 원인및 조치방법 file 2017.12.05 3512
521 --master yarn 옵션으로 spark client프로그램 실행할때 메모리 부족 오류발생시 조치방법 2016.05.27 3522
520 원보드 컴퓨터 비교표 file 2014.08.04 3526
519 spark stream처리할때 두개의 client프로그램이 동일한 checkpoint로 접근할때 발생하는 오류 내용 2018.01.16 3537
518 oozie db변경후 재기동시 "Table 'oozie.VALIDATE_CONN' doesn't exist" 오류 발생시 조치방법 2018.05.23 3537
517 Cloudera Manager 5.x설치시 embedded postgresql를 사용하는 경우의 관리정보 2018.04.13 3540
516 워킹 메모리에 대한 정보를 처리하는 클래스 파일 2016.07.21 3541
515 eclipse editor 설정방법 2022.02.01 3545
514 프로세스를 확인해서 프로세스를 삭제하는 shell script예제(cryptonight) 2018.02.02 3549
513 [Impala jdbc]CDP7.1.7환경에서 java프로그램을 이용하여 kerberized impala cluster에 접근하여 SQL을 수행하는 방법 2023.08.22 3549
512 kafkaWordCount.scala의 producer와 consumer 클래스를 이용하여 kafka를 이용한 word count 테스트 하기 2016.08.02 3562
511 spark notebook 0.7.0설치및 설정 2016.11.14 3576
위로